TMP86FS49AIUG datasheet(57/296 Pages) TOSHIBA

57 / 296 page

Page 41

TMP86FS49AIUG

Figure 3-4 Saving/Restoring General-purpose Registers under Interrupt Processing

3.3.3

Interrupt return

Interrupt return instructions [RETI]/[RETN] perform as follows.

As for address trap interrupt (INTATRAP), it is required to alter stacked data for program counter (PC) to

restarting address, during interrupt service program.

Note:If [RETN] is executed with the above data unaltered, the program returns to the address trap area and

INTATRAP occurs again.When interrupt acceptance processing has completed, stacked data for PCL and

PCH are located on address (SP + 1) and (SP + 2) respectively.

Example :Save/restore register using data transfer instructions

PINTxx:

(GSAVA), A

; Save A register

(interrupt processing)

A, (GSAVA)

; Restore A register

RETI

; RETURN

[RETI]/[RETN] Interrupt Return

1. Program counter (PC) and program status word

(PSW, includes IMF) are restored from the stack.

2. Stack pointer (SP) is incremented by 3.

Example 1 :Returning from address trap interrupt (INTATRAP) service program

PINTxx:

POP

; Recover SP by 2

WA, Return Address

;

PUSH

; Alter stacked data

(interrupt processing)

RETN

; RETURN

Interrupt

acceptance

Interrupt

service task

Restoring

registers

Saving

registers

Interrupt return

Saving/Restoring general-purpose registers using PUSH/POP data transfer instruction

Main task

TMP86FS49AIUG Datasheet(PDF) 57 Page - Toshiba Semiconductor

TMP86FS49AIUG Datasheet(HTML) 57 Page - Toshiba Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL