| Electronic Components Datasheet Search |
|
S32Z2 Datasheet(PDF) 84 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
S32Z2 Datasheet(HTML) 84 Page - NXP Semiconductors |
|
84 / 138 page ![]() 1. In the equations provided for Min and Max values, tENET_CLK is the NETC system clock period in nanoseconds, EHOLD and MDIO_HOLD are the actual values programmed into these register fields, and "MDC clock" is the MDC clock period in nanoseconds. MDC (output) MDC14 MDC12 MDC13 MDC11 MDC10 MDC15 MDIO (output) MDIO (input) MDC00 Figure 48. MDC / MDIO Timing 14.3.8 SENT Interface Table 39. SENT Interface Symbol Description Min Typ Max Unit Condition Spec Number tFALL Maximum SENT input signal fall time transition 1,2,3,4 — — 2.17 UI SAE J2716 SENT standard complied with in the application, SAE J2716 recommended RC input filter used in the application — 1. By ensuring that the input fall transition is within the specification, SENT calibration and data bit errors are guaranteed not to occur as a result of variation in the input switching threshold level of the SENT input pin on the device. Switching threshold level variation is due to input signal noise, supply noise, and temperature drift. 2. This value is the ratio of the maximum 6.5uS fall time and minimum 3uS clock (UI), and assumes the transmit, clock, and measurement error tolerances as defined by the SAE 2716 SENT standard. 3. Input hysteresis enabled on I/O pads with selectable enable/disable (per the SAE 2716 SENT standard). Does not apply to pads without hysteresis control. In this case, the SENT module glitch filter should be used to reject false transitions. SRX programmable filter should be set to a value closest to 1/10th of a bit time where the max value of 128 is sufficient for long bit times. 4. SENT inputs are supported at 3.3V on the device, with assumption that the input levels scale linearly for the recommended 3.3V circuit in the SAE 2716 SENT standard. The device does not support 1.8V or 5V SENT inputs. 14.3.9 CAN See GPIO pads for CAN specifications. NXP Semiconductors S32Z27 S32Z2 Data Sheet S32Z27 All information provided in this document is subject to legal disclaimers. © 2020 - 2025 NXP B.V. All rights reserved. Product Data Sheet Rev. 6 — 14 May 2025 Document feedback 84 / 138 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |