| Electronic Components Datasheet Search |
|
STMPE2403 Datasheet(PDF) 42 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STMPE2403 Datasheet(HTML) 42 Page - STMicroelectronics |
|
42 / 63 page ![]() PWM controller STMPE2403 42/63 11.2 PWM Control and Status Register (PWMCS) Bit 7 6 5 4 3 210 ExtSel ExtEn II2 II1 II0 EN2 EN1 EN0 Read/Write RW RW R R R RW RW RW Reset Value 0 0 0 0 0 0 0 0 Table 40. Bit description Bits Name Description 0EN0 PWM Channel 0 Enable bit. ‘1’ – Enable the PWM Channel 0 ‘0’ – Reset the PWM Channel 0. Only when the PWM channel is in reset state, the stream of commands can be written into its data port, which in this case is PWM_Command_Channel_0. 1EN1 PWM Channel 1 Enable bit. ‘1’ – Enable the PWM Channel 1 ‘0’ – Reset the PWM Channel 1. Only when the PWM channel is in reset state, the stream of commands can be written into its data port, which in this case is PWM_Command_Channel_1. 2EN2 PWM Channel 2 Enable bit. ‘1’ – Enable the PWM Channel 2 ‘0’ – Reset the PWM Channel 2. Only when the PWM channel is in reset state, the stream of commands can be written into its data port, which in this case is PWM_Command_Channel_2. 3II0 PWM Invalid Instruction Status bit for PWM Channel 0 ‘0’ – No invalid command encountered during the instruction execution. ‘1’ – Invalid command encountered and this puts the PWM Channel 0 into reset state. 4II1 PWM Invalid Instruction Status bit for PWM Channel 1 ‘0’ – No invalid command encountered during the instruction execution. ‘1’ – Invalid command encountered and this puts the PWM Channel 1 into reset state. 5II2 PWM Invalid Instruction Status bit for PWM Channel 2 ‘0’ – No invalid command encountered during the instruction execution. ‘1’ – Invalid command encountered and this puts the PWM Channel 2 into reset state. 6ExtEn External Trigger Enable ‘0’ – External triggering function is disabled ‘1’ – External triggering function is enabled If enabled, GPIO-15 is used as trigger input/output 7ExtSel External Trigger Direction Selection ‘0’ – Active high external trigger input ‘1’ – Active low external trigger output |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |