M32CSLASH86 datasheet(301/505 Pages) RENESAS

Part #	M32C/86

Description	RENESAS 16/32-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M32C/80 SERIES

PDF	505 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

301 / 505 page

Page 278

22. Intelligent I/O (Time Measurement Function)

)

(

Figure 22.13 Time Measurement Function (1)

FFFF16

Base Timer

Signal Applied

to the INPC1j Pin

000016

G1TMj Register

TM1jR Bit in the

IIOiIR Register

i= 0 to 4, 8 to 10

j= 0 to 7

The above applies to the following conditions:

The CTS1 and CTS0 bits in the G1TMCRj registers are set to "012" (rising edge).

The PR bit is set to "0" (no prescaler used) and the GT bit is set to "0" (no gate

function used).

The RST2 and RST1 bits in the G1BCR1 register are set to "002" (no base timer

reset).

The UD1 and UD0 bits are set to "002" (counter increment mode).

Write "0" by program if setting to "0"

To set the base timer to "000016" (setting the RST1 bit to "1" and the RST2 bit to "0")

when the base timer value matches the G1PO0 register setting, the base timer is set

to "000016" after it reaches the G1PO0 register value +2.

"H"

"L"

"1"

"0"

M32C/86 Datasheet(PDF) 301 Page - Renesas Technology Corp