74LVC1G74

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2011. All rights reserved.

Product data sheet

Rev. 10 — 2 December 2011

6 of 25

NXP Semiconductors

74LVC1G74

Single D-type flip-flop with set and reset; positive edge trigger

8.

Limiting values

[1]

The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2]

[3]

For TSSOP8 packages: above 55

C the value of P

For VSSOP8 packages: above 110

C the value of P

For XSON8, XSON8U and XQFN8U packages: above 118

C the value of P

9.

Recommended operating conditions

Table 6.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage

0.5

+6.5

V

input clamping current

50

-

mA

input voltage

[1]

0.5

+6.5

V

output clamping current

-

50

mA

output voltage

Active mode

[1]

0.5

V

Power-down mode

[1][2]

0.5

+6.5

V

output current

-

50

mA

supply current

-

100

mA

ground current

100

-

mA

total power dissipation

[3] -

300

mW

storage temperature

65

+150

C

Table 7.

Operating conditions

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage

1.65

5.5

V

input voltage

0

5.5

V

output voltage

Active mode

0

V

0

5.5

V

ambient temperature

40

+125

C

t/V

input transition rise and fall rate

-

20

ns/V

-

10

ns/V