HCS473_13 datasheet(22/68 Pages) MICROCHIP

22 / 68 page

HCS473

DS40035D-page 22

Preliminary

 2000-2013 Microchip Technology Inc.

3.2.2.4

Command Sequence

The transponder reader follows the HCS473’s Field

Acknowledge by sending the desired 3-bit command,

3-bit option or address, associated data and CRC;

each as required. LF commands are Pulse Position

Modulated (PPM) as shown in Figure 3-10. The last bit

(CRC bit) should be followed by leaving the field on for

TFINH.

TFINH should be appropriately adjusted to receive con-

secutive

commands

responses.

See

Section 3.2.4 and Section 3.2.5 for LF response and

consecutive command considerations.

FIGURE 3-11:

HCS473 TRANSPONDER WAKE-UP SEQUENCE

Communication from reader to HCS473

Communication from HCS473 to reader

SKIPACK = 1 - Field Acknowledge is not sent

Inductive

(LC)

TSF

Command

TCMD

TSF

MAX

SKIPACK = 0 - Field Acknowledge sent when device wakes

Inductive

(LC)

Response

(DATA)

125kHz Field

(on LC pins)

TCMD

Command

TCMD

3LFTE

3LFTE 3LFTE

Simultaneous LF

Acknowledge

(LFRSP=1)

RF Acknowledge

(RFRSP=1)

HCS473 Datasheet(PDF) 22 Page - Microchip Technology

HCS473 Datasheet(HTML) 22 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Datasheet Download

Link URL