51795B datasheet(69/100 Pages) MICROCHIP

69 / 100 page

PICkit™ 3 USER’S GUIDE

 2010 Microchip Technology Inc.

DS51795B-page 69

Appendix A. Hardware Specification

A.1

INTRODUCTION

The hardware and electrical specifications of the PICkit 3 programmer/debugger

system are detailed.

A.2

HIGHLIGHTS

This chapter discusses:

• Declaration of Conformity

• USB Port/Power

• PICkit 3 Programmer/Debugger

• Standard Communication Hardware

• Target Board Considerations

A.3

DECLARATION OF CONFORMITY

Microchip Technology, Inc.

2355 W. Chandler Blvd.

Chandler, Arizona 85224-6199

USA

hereby declare that the product:

PICkit 3 Programmer/Debugger

complies with the following standards, provided that the restrictions stated in the

operating manual are observed:

Standards: EN61010-1

Laboratory Equipment

Microchip Technology, Inc.

Date: January 2009

Important Information Concerning the Use of the PICkit 3 programmer/Debugger

Due to the special nature of the PICkit 3 programmer/debugger, the user is advised that

it can generate higher than normal levels of electromagnetic radiation which can

interfere with the operation of all kinds of radio and other equipment.

To comply with the European Approval Regulations therefore, the following restrictions

must be observed:

1. The development system must be used only in an industrial (or comparable)

area.

2. The system must not be operated within 20 meters of any equipment which may

be affected by such emissions (radio receivers, TVs etc.).

51795B Datasheet(PDF) 69 Page - Microchip Technology