| Electronic Components Datasheet Search |
|
51795B Datasheet(PDF) 71 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
51795B Datasheet(HTML) 71 Page - Microchip Technology |
|
71 / 100 page ![]() Hardware Specification 2010 Microchip Technology Inc. DS51795B-page 71 A.6 STANDARD COMMUNICATION HARDWARE For standard debugger communication with a target (Section 2.3 “Debugger to Target Communication”, “Standard ICSP Device Communication“), use an adapter with an RJ-11 connector. To use this type of communication with a header board, you may need a device-specific Processor Pak, which includes an 8-pin connector header board containing the desired ICE/ICD device and a standard adapter board. For more on available header boards, see the “Header Board Specification” (DS51292). A.6.1 Standard Communication The standard communication is the main interface to the target processor. It contains the connections to the high voltage (VPP), VDD sense lines, and clock and data connections required for programming and connecting with the target devices. The VPP high-voltage lines can produce a variable voltage that can swing from 1.8 to 14 volts to satisfy the voltage requirements for the specific emulation processor. The VDD sense connection draws current from the target processor. The clock and data connections are interfaces with the following characteristics: • Clock and data signals are in High-Impedance mode (even when no power is applied to the PICkit 3 programmer/debugger system) • Clock and data signals are protected from high voltages caused by faulty targets systems, or improper connections • Clock and data signals are protected from high current caused from electrical shorts in prototype or target systems FIGURE A-1: 6-PIN STANDARD PINOUT Note: Older header boards used a 6-pin (RJ-11) connector instead of an 8-pin connector, so these headers may be connected directly to the debugger. 1 2 3 4 5 6 Pin Name Function 1MCLR/VPP Power 2VDD_TGT Power on target 3 GND Ground 4 PGD (ICSPDAT) Standard Com Data 5 PGC (ICSPCLK) Standard Com Clock 6 PGM (LVP) Low Voltage Programming Bottom of Target Board Standard Socket |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |