| Electronic Components Datasheet Search |
|
MPC875CVR133 Datasheet(PDF) 67 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC875CVR133 Datasheet(HTML) 67 Page - Freescale Semiconductor, Inc |
|
67 / 84 page ![]() MPC875/MPC870 PowerQUICC™ Hardware Specifications, Rev. 4 Freescale Semiconductor 67 USB Electrical Characteristics 14 USB Electrical Characteristics This section provides the AC timings for the USB interface. 14.1 USB Interface AC Timing Specifications The USB Port uses the transmit clock on SCC1. Table 30 lists the USB interface timings. 15 FEC Electrical Characteristics This section provides the AC electrical specifications for the Fast Ethernet controller (FEC). Note that the timing specifications for the MII signals are independent of system clock frequency (part speed designation). Also, MII signals use TTL signal levels compatible with devices operating at either 5.0 or 3.3 V. 15.1 MII and Reduced MII Receive Signal Timing The receiver functions correctly up to a MII_RX_CLK maximum frequency of 25 MHz + 1%. The reduced MII (RMII) receiver functions correctly up to a RMII_REFCLK maximum frequency of 50 MHz + 1%. There is no minimum frequency requirement. In addition, the processor clock frequency must exceed the MII_RX_CLK frequency – 1%. Table 31 provides information on the MII receive signal timing. Table 30. USB Interface AC Timing Specifications Name Characteristic All Frequencies Unit Min Max US1 USBCLK frequency of operation1 Low speed Full speed 1 USBCLK accuracy should be ±500 ppm or better. USBCLK may be stopped to conserve power. 6 48 MHz US4 USBCLK duty cycle (measured at 1.5 V) 45 55 % Table 31. MII Receive Signal Timing Num Characteristic Min Max Unit M1 MII_RXD[3:0], MII_RX_DV, MII_RX_ER to MII_RX_CLK setup 5 — ns M2 MII_RX_CLK to MII_RXD[3:0], MII_RX_DV, MII_RX_ER hold 5 — ns M3 MII_RX_CLK pulse width high 35% 65% MII_RX_CLK period M4 MII_RX_CLK pulse width low 35% 65% MII_RX_CLK period M1_RMII RMII_RXD[1:0], RMII_CRS_DV, RMII_RX_ERR to RMII_REFCLK setup 4— ns M2_RMII RMII_REFCLK to RMII_RXD[1:0], RMII_CRS_DV, RMII_RX_ERR hold 2— ns |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |