www.fairchildsemi.com

2

Recommended Operating

Note 1: The “Absolute Maximum Ratings” are those values beyond which

the safety of the device cannot be guaranteed. The device should not be

operated at these limits. The parametric values defined in the Electrical

Characteristics tables are not guaranteed at the absolute maximum rating.

The “Recommended Operating Conditions” table will define the conditions

for actual device operation.

the switch.

Note 3: The input and output negative voltage ratings may be exceeded if

the input and output diode current ratings are observed.

Note 4: Unused control inputs must be held HIGH or LOW. They may not

float.

DC Electrical Characteristics

Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the

voltages on the two (A or B) pins.

−0.5V to +7.0V

−0.5V to +7.0V

−0.5V to +7.0V

−50 mA

128 mA

±100 mA

−65°C to +150 °C

4.0V to 5.5V

Switch Control Input

0 ns/V to 5 ns/V

Switch I/O

0 ns/V to DC

Symbol

Parameter

Units

Conditions

Min

Typ

Max

(V)

(Note 5)

Clamp Diode Voltage

4.5

−1.2

V

HIGH Level Input Voltage

4.0–5.5

2.0

V

LOW Level Input Voltage

4.0–5.5

0.8

V

Input Leakage Current

5.5

±1.0

0

±10

OFF-STATE Leakage Current

5.5

±1.0

Switch On Resistance

4.5

20

26

38

Ω

(Note 6)

4.5

20

27

40

Ω

4.5

202848

Ω

4.0

203048

Ω

Quiescent Supply Current

5.5

3

5.5

2.5

mA

One Input at 3.4V