ST1S32 datasheet(9/29 Pages) STMICROELECTRONICS

9 / 29 page

ST1S32

Functional description

Doc ID 023246 Rev 1

9/29

Figure 4.

Block diagram of the loop for the small signal analysis

Three main terms can be identified to obtain the loop transfer function:

from control (output of E/A) to output, GCO(s);

from output (VOUT) to the FB pin, GDIV(s);

from the FB pin to control (output of E/A), GEA(s).

The transfer function from control to output GCO(s) results:

Equation 1

where RLOAD represents the load resistance, Ri the equivalent sensing resistor of the

current sense circuitry (0.369

Ω), ωp the single pole introduced by the LC filter and ωz the

zero given by the ESR of the output capacitor.

FH(s) accounts for the sampling effect performed by the PWM comparator on the output of

the error amplifier that introduces a double pole at one half of the switching frequency.

Equation 2

Cout

Current sense

Logic

And

Driver

Slope

Compensation

PWM comparator

Error Amp

0.8V

High side

Switch

Low side

Switch

GCO(s)

GDIV(s)

GEA(s)

VIN

VOUT

VFB

AM12609V1

CO s

()

LOAD

------------------

out

⋅

------------------------------

–

() 0.5

–

⋅

[]

⋅

-----------------------------------------------------------------------------------------------------

-----

⎝⎠

⎛⎞

-----

⎝⎠

⎛⎞

---------------------

H s

()

⋅⋅

⋅

ESR

OUT

⋅

----------------------------------

ST1S32 Datasheet(PDF) 9 Page - STMicroelectronics

ST1S32 Datasheet(HTML) 9 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Datasheet Download

Link URL