MN103SFM9K

32-bit Single-chip Microcontroller

Publication date: August 2014

3

PubNo. 232M9-010E

Timer 13 overflow/underflow interrupts

Timer 13 compare/capture A interrupts

Timer 13 compare/capture B interrupts

Timer 14 underflow interrupts

Timer 15 underflow interrupts

Timer 16 underflow interrupts

Timer 17 underflow interrupts

<Serial Interface>

Serial 0 reception interrupts

Serial 0 transmission interrupts

Serial 1 reception interrupts

Serial 1 transmission interrupts

Serial 2 reception interrupts

Serial 2 transmission interrupts

<PWM>

PWM0 overflow interrupts

PWM0 underflow interrupts

PWM1 overflow interrupts

PWM1 underflow interrupts

<A/D interrupt>

A/D 0 conversion complete interrupt

A/D 0 conversion complete B interrupt

A/D 1 conversion complete interrupt

A/D 1 conversion complete B interrupt

A/D 2 conversion complete interrupt

External interrupts:

9 interrupts

Interrupt pins:

IRQ00 to IRQ08

Interrupt detection condition:

Edge (rising edge, falling edge), both edges, High-level detection, Low-level detection

Noise filter’s filtering is possible at all conditions.

Timer Counter

8-bit timer

12 sets

16-bit timer

6 sets

Timer 0 (8-bit timer for general use)

- Interval timer, Timer pulse output, Event count

- Count clock source, TM0IO pin input

IOCLK, IOCLK/8, IOCLK/32, IOCLK/128, Timer 1 underflow,

Timer 2 underflow, TM0IO pin input

Timer 1 (8-bit timer for general use)

- Interval timer, Timer pulse output, Event count,

Cascade connection function

- Count clock source

IOCLK, IOCLK/8, IOCLK/32, Timer 0 underflow,

Timer 2 underflow, TM1IO pin input

Timer 2 (8-bit timer for general use)

- Interval timer, Timer pulse output, Event count, Cascade connection function

- Count clock source

IOCLK, IOCLK/8, IOCLK/32, IOCLK/128, Timer 0 underflow, Timer 1 underflow,

TM2IO pin input

Timer 3 (8-bit timer for general use)