| Electronic Components Datasheet Search |
|
LIS2DS12 Datasheet(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LIS2DS12 Datasheet(HTML) 44 Page - STMicroelectronics |
|
44 / 68 page ![]() Register description LIS2DS12 44/68 DocID027753 Rev 4 8.10 CTRL2 (21h) Control register 2 (r/w) Table 42. Control register 2 Table 43. Control register 2 description BOOT SOFT_ RESET 0(1) 1. This bit must be set to ‘0’ for the correct operation of the device. FUNC_CFG_ EN(2)(3)(4) 2. When this bit is enabled, only advanced configuration registers can be written. For proper functionality of the device, all the other registers must not be modified. 3. Details of advanced configuration registers are available in Section 9: Advanced configuration register mapping and Section 10: Advanced configuration registers description. 4. To disable the advanced configuration, bit FUNC_CFG_EN in CTRL2 (3Fh) must be set to '0'. Refer to Section 10.8: CTRL2 (3Fh). FDS_ SLOPE IF_ADD_ INC I2C_ DISABLE SIM BOOT Forces the reboot of the flash content in the trimming and configuration registers. Default value: 0 (0: disable; 1: Reboot enable) SOFT_RESET Soft reset acts as reset for all control registers, then goes to 0. Default value: 0 (0: disabled; 1: enabled) FUNC_CFG_ EN Access to pedometer/sensor hub advanced configuration registers from address 2Bh to 3Fh. Default value: 0 (0: disable the access to pedometer/sensor hub advanced configuration registers; 1: enable the access to pedometer/sensor hub advanced configuration registers) FDS_SLOPE High-pass filter data selection on output register and FIFO. Default value: 0 (0: internal filter bypassed; 1: internal filter enabled on output register and FIFO) IF_ADD_INC Register address automatically incremented during multiple byte access with a serial interface (I2C or SPI). Default value: 1 (0: disabled; 1: enabled) I2C_DISABLE Disable I2C communication protocol. Default value: 0 (0: SPI and I2C interfaces enabled; 1: I2C mode disabled) SIM SPI serial interface mode selection. Default value: 0 0: 4-wire interface; 1: 3-wire interface |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |