M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

http://www.macom.com/support

M02011

11

CMOS Transimpedance Amplifier with AGC

for Fiber Optic Networks up to 622 Mbps

Rev V5

3.0 Functional Description

3.1

Overview

The M02011 is a CMOS transimpedance amplifier with AGC. The AGC gives a wide dynamic range of 40 dB. The

high transimpedance gain of 66 k

Ω ensures good sensitivity.

For optimum system performance, the M02011 die should be mounted with a GaAs or InGaAs PIN photodetector

inside a lensed TO-Can or other optical sub-assembly.

The M02011 can either bias the PIN diode from the internal regulator, or use an externally biased PIN diode.

A replica of the average photodiode current is available at the MON pad for photo-alignment and 'Loss of Signal'

(LOS) monitoring.

Figure 3-1.

M02011 Block Diagram

DC

Restore

Phase

Splitter

AGC

PINA

PINK

MON

DOUT

DOUT

2.6 V

1 V

DC Shift