M38B53M4-059FP datasheet(97/355 Pages) MITSUBISHI

Part #	M38B53M4-059FP

Description	8-BIT SINGLE-CHIP MICROCOMPUTER

PDF	355 Pages

Scroll/Zoom	100%

Manufacturer	MITSUBISHI [Mitsubishi Electric Semiconductor]

Direct Link	http://www.mitsubishichips.com

Logo

97 / 355 page

2-9

APPLICATION

2.1 I/O port

38B5 Group User’s Manual

(2)

Termination remarks

Input ports and I/O ports :

Do not open in the input mode.

q Reason

• The power source current may increase depending on the first-stage circuit.

• An effect due to noise may be easily produced as compared with proper termination and

shown on the above.

I/O ports :

When setting for the input mode, do not connect to VCC or VSS directly.

q Reason

If the direction register setup changes for the output mode because of a program runaway or

noise, a short circuit may occur between a port and VCC (or VSS).

I/O ports :

When setting for the input mode, do not connect multiple ports in a lump to VCC or VSS through

a resistor.

q Reason

If the direction register setup changes for the output mode because of a program runaway or

noise, a short circuit may occur between ports.

• At the termination of unused pins, perform wiring at the shortest possible distance (20 mm or less)

from microcomputer pins.

M38B53M4-059FP Datasheet(PDF) 97 Page - Mitsubishi Electric Semiconductor