FEDL7066-01

ML7066

29/29

NOTICE

No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS Semiconductor

Co., Ltd.

The content specified herein is subject to change for improvement without notice.

The content specified herein is for the purpose of introducing LAPIS Semiconductor's products (hereinafter "Products"). If

you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from LAPIS

Semiconductor upon request.

Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage

and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass

production.

Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any

damage arising from any inaccuracy or misprint of such information, LAPIS Semiconductor shall bear no responsibility for

such damage.

The technical information specified herein is intended only to show the typical functions of and examples of application

circuits for the Products. LAPIS Semiconductor does not grant you, explicitly or implicitly, any license to use or exercise

intellectual property or other rights held by LAPIS Semiconductor and other parties. LAPIS Semiconductor shall bear no

responsibility whatsoever for any dispute arising from the use of such technical information.

The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as

audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement

devices).

The Products specified in this document are not designed to be radiation tolerant.

While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a Product may fail or

malfunction for a variety of reasons.

Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical

injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control

and fail-safe designs. LAPIS Semiconductor shall bear no responsibility whatsoever for your use of any Product outside of

the prescribed scope or not in accordance with the instruction manual.

The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely

high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human

injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,

fuel-controller or other safety device). LAPIS Semiconductor shall bear no responsibility in any way for use of any of the

Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a

ROHM sales representative before purchasing.

If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign

Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.

Copyright 2011 LAPIS Semiconductor Co., Ltd.

2-4-8 Shinyokohama, Kouhoku-ku,

Yokohama 222-8575, Japan

http://www.lapis-semi.com/en/