NM1282KSLAXAL datasheet(35/120 Pages) NANYA

35 / 120 page

Version 1.3

Nanya Technology Corp.

06/2018

2Gb SLC NAND + 2Gb LPDDR2

NM1282KSLAXAL

NTC Proprietary

Level: Property

For X8 :

10 Copy Page address (M + Rn) is input and if the data needs to be changed, changed data is input.

11 By issuing the 10h command, the data in the Page Buffer is programmed to Page M + Rn.

(*1) Since the last page programming by the 10h command is initiated after the previous cache program, the tPROG here will be expected

as the following,

tPROG = tPROG of the last page + tPROG of

the previous page − ( command input cycle + address input cycle + data output/input cycle

time of the last page)

NOTE) This operation needs to be executed within District-0 or District-1.

Data input is required only if previous data output needs to be altered.

If the data has to be changed, locate the desired address with the column and page address input after the 8Ch command, and

change only the data that needs be changed.

If the data does not have to be changed, data input cycles are not required.

Make sure

 is held to High level when Page Copy (2) operation is performed.

Also make sure the Page Copy operation is terminated with 8Ch-10h command sequence

NM1282KSLAXAL Datasheet(PDF) 35 Page - Nanya Technology Corporation.