2. Intel FPGA Download Cable II Specifications

2.1. Voltage Requirements

device being programmed. Connect pull-up resistors to the same power supply as the

Table 2.

Device Family

Intel FPGA Download Cable II VCC Voltage Required

Arria GX

Arria II GX

Arria V

Arria 10

Cyclone III

Cyclone IV

Cyclone IV E devices.

Cyclone V

EPC4, EPC8, EPC16

3.3 V

EPCS1, EPCS4, EPCS16, EPCS64, EPCS128

3.3 V

EPCS/Q16, EPCS/Q64, EPCS/Q128, EPCQ256,

EPCQ512

3.3 V

EPCQ-L

1.8 V

MAX II, MAX V

MAX 10

Stratix II, Stratix II GX

Stratix III, Stratix IV

Stratix V

2.2. Cable-to-Board Connection

A standard USB cable connects to the USB port on the device.

UG-01150 | 2018.04.19

Send Feedback

Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus

and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other

countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in

accordance with Intel's standard warranty, but reserves the right to make changes to any products and services

at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any

information, product, or service described herein except as expressly agreed to in writing by Intel. Intel

customers are advised to obtain the latest version of device specifications before relying on any published

information and before placing orders for products or services.

*Other names and brands may be claimed as the property of others.

ISO

9001:2015

Registered