NXP Semiconductors

WLAN8101C

5 GHz Wi-Fi 6 Front-End Module

10 Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol

Parameter

Conditions

Min Typ

Max

Unit

supply

voltage

[1] -0.3 -

6

V

input voltage applied to control pins SEL3_x, LNAEN_x, and PAEN_x,

digital control signals for RX, TX, and isolation modes

-0.3 -

4.2

V

on ANT pin, RX LNA mode, MCS0 signal applied

-

-

10

dBm

on ANT pin, RX Bypass mode, MCS0 signal applied

-

-

18

dBm

input power

on TX pin, MCS0 signal applied

-

-

10

dBm

TX_RUG

TX

ruggedness

(no

irreversible

damage)

test, VSWR all phases

-

-

10:1

-

storage

temperature

-55 -

125

°C

junction

temperature

-

-

175

°C

mounting

base

temperature

-

-

100

°C

Human Body Model (HBM) according to

ANSI/ESDA/JEDEC standard JS-001

-

-

2

kV

Electrostatic

Discharge

Voltage

Charged Device Model (CDM) according to

ANSI/ESDA/JEDEC standard JS-002

-

-

500

V

Table 6. Limiting values

[1]

Product withstands 30000 charger insert and pull-out events with a duration of 100 ms and a maximum supply voltage of 6 V

11 Recommended operating conditions

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

operating frequency

5.150

-

5.925

GHz

supply voltage

[1] 2.70

3.85

4.75

V

HIGH-level input voltage

1.6

1.8

3.6

V

LOW-level input voltage

0.0

-

0.4

V

ambient temperature

-40

25

85

°C

Table 7. Recommended operating conditions

[1]

Product is functional with reduced performance at supply voltages from 2.5 V to 2.7 V.

WLAN8101C

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

Product data sheet

Rev. 3 — 11 August 2020

6 / 20