| Electronic Components Datasheet Search |
|
WLAN8101CMP Datasheet(PDF) 9 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
WLAN8101CMP Datasheet(HTML) 9 Page - NXP Semiconductors |
|
9 / 20 page ![]() NXP Semiconductors WLAN8101C 5 GHz Wi-Fi 6 Front-End Module 13.3 RF performance from TX to ANT Tamb = 25 °C; VCC = 3.85 V; VIH = 1.8 V; VIL = 0 V; All ports are terminated with 50 Ω; Pi = -30 dBm, f = 5.150 GHz to 5.925 GHz, single channel performance. Unless otherwise specified. All values are measured at product input/output as reference plane. Measurements are done using the application schematic. (See application note AN12711) Symbol Parameter Conditions Min Typ Max Unit TX_gain1a, no RF - 190 - mA TX_gain2a, no RF - 145 - mA TX_gain3, no RF - 60 - mA TX_gain1a, Po = 17.5 dBm VHT80 - 245 - mA TX_gain1a, Po = 19 dBm 11n MCS7 HT20 - 265 - mA TX_gain1a, Po = 22 dBm 11a OFDM6, 20 MHz - 325 - mA TX_gain2a, Po = 14.5 dBm, VHT80 - 190 - mA TX_gain2a, Po = 16 dBm, 11n MCS7 HT20 - 205 - mA TX_gain2a, Po = 19 dBm, 11a OFDM6, 20 MHz - 245 - mA ICC supply current TX_gain3, Po = 4 dBm, 11ax MCS10/11 HE80 - 65 - mA TX_gain1a mode - 30 - dB TX_gain2a mode - 27.5 - dB Gp power gain TX_gain3 mode - 16 - dB all TX modes, for any 80 MHz bandwidth - +/-0.25 - dB Gflat gain flatness all TX modes, for entire frequency range - +/-0.75 - dB RLi input return loss all TX modes, looking into TX pin - 10 - dB RLo output return loss all TX modes, looking into ANT pin - 8 - dB ISL(ANT-RX) ANT-RX isolation all TX modes, measured between ANT, and RX pins, measured on the same channel 33 - - dB 11a, OFDM6, 20 MHz TX_gain1a, Po = 22 dBm - 3.5 - dB 11n, MCS0, 20 MHz SEM margin margin to spectrum emission mask TX_gain1a, Po = 21 dBm - 3 - dB 11a, OFDM6, 20 MHz, 180 μs burst, 50 % duty cycle TX_gain1a, Po = 22 dBm - -20 - dB TX_gain2a, Po = 19 dBm - -20 - dB 11n, MCS0, 20 MHz, 180 μs burst, 50 % duty cycle TX_gain1a, Po = 20.5 dBm - -26 - dB TX_gain2a, Po = 17.5 dBm - -26 - dB 11a, OFDM54, 20 MHz, 180 μs burst, 50 % duty cycle TX_gain1a, Po = 19.5 dBm - -32 - dB EVMdyn dynamic error vector magnitude TX_gain2a, Po = 16.5 dBm - -32 - dB Table 11. RF performance from TX to ANT WLAN8101C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved. Product data sheet Rev. 3 — 11 August 2020 9 / 20 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |