AiT Semiconductor Inc.

WSI

www.ait-ic.com

WIRE WOUND SMD INDUCTOR

REV1.1

- 12 -

●TEST EQUIPMENT

1.

HP4284A, HP42841A - L, Q, DCR, IDC

2.

HP8753D Network analyzer – SRF

●OPERATING & STORAGE CONDITION

1.

Operating Temp: -40 ~ +125℃ (Including self - temperature rise)

2.

Storage Temp: a. Product with Taping: -10 ~ 45℃, 50 ~ 60% RH

b. On Board: -40 ~ +125℃

3.

Storage Life Time: 12 Month (Less than 40℃ and 60% RH)

Standard Atmosphere Conditions:

Ambient Temperature 20 ± 15℃; Humidity RH 65 ± 20%

If there may be any doubt on the test result, Measurement shall be made within the following limits:

Ambient Temperature 25 ± 5℃; Humidity RH 75 ± 10%

●RECOMMEND REFLOW CURVE (TIME: Second)

Notice: Iron Soldering, Solder < 30 Watt,

Direct touch the terminal x 3 Sec. Max. @ 350℃

●ATTENTION & CAUTION:

* Keep out of Splashing water or salt water

* Avoid Toxic Gas (Hydrogen sulfide, Sulfurous acid, Chlorine, Ammonia)

* Vibrations or shocks which exceed the specified condition

* Dew condense

* Layout near the edge of PCB

* Over flexure after SMT mounting & PCBA

* Pin foot or SMD pad solder ability: Pb free type is best within 6 months after delivery

* Humidity sensitive, IPC/JEDEC J-STD-020 MSL if over Level 1, recommend bake 30mins@150℃ before PCBA

* Caution for human life relative applications: PLS contact & consult with AiT team in design stage.