| Electronic Components Datasheet Search |
|
STA2500D Datasheet(PDF) 46 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STA2500D Datasheet(HTML) 46 Page - STMicroelectronics |
|
46 / 57 page ![]() Digital interfaces STA2500D 46/57 Doc ID 16067 Rev 1 7.4 The JTAG interface The JTAG interface is compliant with the JTAG IEEE Standard 1149.1. It allows both the boundary scan of the digital pins and the debug of the ARM7TDMI application when connected with the standard ARM7 developments tools. It is also used for the industrial test of the device. The JTAG interface is available through the following 5 pins: BT_GPIO_8, BT_GPIO_9, BT_GPIO_10, BT_GPIO_11 and BT_GPIO_16. 7.5 Alternate I/O functions The STA2500D has 10 additional general purpose pins on top of the 4 PCM pins, the 4 UART pins and BT_CLK_REQ_OUT_1 that can also be reconfigured. They are fully programmable via specific HCI commands. They can be configured as input, output, interrupt with asynchronous or synchronous edge or level detection and/or wake-up. The alternative functions are: ● Wake-up by the Host in Deep Sleep mode through UART or SPI with handshake (see Section : Deep sleep mode entry and wake-up through H4 UART or H4 SPI with handshake) ● WLAN coexistence control ● I2C interface ● PCM synchronization ● GPIOs ● UART / SPI interface ● external driver/LNA control for Class 1 operation. 19 pins can be redefined by SW to perform other functions. Pin BT_HOST_WAKEUP e.g. can be redefined to perform up to 7 functions, depending on SW settings. 4 exemplary combinations of pin programmings are given in Table 29. The available functions are ● ex. 1: UART + I2C + Class 1 control ● ex. 2: UART + WLAN + Class 1 control ● ex. 3: SPI + WLAN + Class 1 control ● ex. 4: SPI + WLAN + I2C + Class 1 control (The complete list of alternate functions is available upon request). Table 29. Examples of BT_GPIO pin programming STA2500D Pin Name ex. 1 ex. 2 ex. 3 ex. 4 BT_UART_RXD/BT_SPI_DI UART_RXD UART_RXD SPI_DI SPI_DI BT_UART_TXD/BT_SPI_DO UART_TXD UART_TXD SPI_DO SPI_DO BT_UART_CTS/BT_SPI_CLK UART_CTS UART_CTS SPI_CLK SPI_CLK BT_UART_RTS/BT_SPI_CSN UART_RTS UART_RTS SPI_CS SPI_CS BT_PCM_CLK PCM_CLK PCM_CLK PCM_CLK PCM_CLK BT_PCM_SYNC PCM_SYNC PCM_SYNC PCM_SYNC PCM_SYNC BT_PCM_A PCM_A PCM_A PCM_A PCM_A |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |