RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS140527

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

11 of 11

RF5365

Pin Names and Descriptions

Pin

Name

Description

1

RX OUT

Receive port for 802.11b/g/n band. Internally matched to 50

Ω. DC block required.

2

VREG

Regulated voltage for the PA bias control circuit. An external bypass capacitor may be needed on the VREG

line for decoupling purposes.

3

TX IN

RF input for the 802.11b/g/n PA. Input is matched to 50

Ω. DC block required.

4

VCC

5

VCC

Supply voltage for the FEM.

6

POWER DETECT

7

ANT

Port matched to 50

Ω. DC block required.

8

GND

Ground connection.

9

BT PORT

Bluetooth® RF Port. DC block required.

10

C_RX

Control pin for WiFi Receive Port. Please see truth table for proper settings.

11

C_BT

Control pin for Bluetooth® Port. Please see truth table for proper settings.

12

C_TX

Control pin for WiFi Transmit Port. Please see truth table for proper settings.

Pkg Base

GND

Ground connection. The backside of the package should be connected to the ground plane through a short

path, i.e., PCB vias under the device are recommended.