MCP3913 datasheet(42/82 Pages) MICROCHIP

42 / 82 page

MCP3913

DS20005227A-page 42

 2013 Microchip Technology Inc.

The default device address bits are A<6:5> = 01 (con-

tact the Microchip factory for other available device

address bits). For more information, see the Product

Identification System

section. The register map is

defined in Table 8-1.

6.3

Reading from the Device

The first register read on the SDO pin is the one defined

by the address (A<4:0>) given in the CONTROL byte.

After this first register is fully transmitted, if the CS pin

is maintained logic low, the communication continues

without an additional control byte and the SDO pin

transmits

another

with

the

address

automatically incremented or not, depending on the

READ<1:0> bit settings.

Four different Read mode configurations can be

defined

through

the

READ<1:0>

bits

the

STATUSCOM register for the address increment (see

Section 6.5,

Continuous

Communications,

Looping on Register Sets

and Table 8-2). The data

on SDO is clocked out of the MCP3913 on the falling

edge of SCK. The reading format for each register is

defined

Section 6.5

“Continuous

Communications, Looping on Register Sets”

FIGURE 6-2:

Read on a Single Register with 24-bit Format (WIDTH_DATA<1:0> = 01,

SPI Mode 1,1).

FIGURE 6-3:

Read on a Single Register with 24-bit Format (WIDTH_DATA<1:0> = 01,

SPI Mode 0,0).

READ Communication (SPI mode 1,1)

Don’t care

SCK

SDI

SDO

DATA<0>

Hi-Z

Device latches SDI on rising edge

Device latches SDO on falling edge

R/W

READ Communication (SPI mode 0,0)

Don’t care

SCK

SDI

SDO

DATA<23>

Hi-Z

Device latches SDI on rising edge

Device latches SDO on falling edge

MCP3913 Datasheet(PDF) 42 Page - Microchip Technology

MCP3913 Datasheet(HTML) 42 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Datasheet Download

Link URL