 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
WM9705 Datasheet(PDF) 31 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM9705 Datasheet(HTML) 31 Page - Wolfson Microelectronics plc |
|
|
31 / 55 page  WM9705 Production Data w PD Rev 4.0 December 2003 31 Support for the MSB of the volume level is not provided by the WM9705. If the MSB is written to, then the WM9705 detects when that bit is set and sets all 4 LSBs to 1s. Example: If the driver writes a 1xxxxx the WM9705 interprets that as x11111. It will also respond when read with x11111 rather than 1xxxxx, the value written to it. The driver can use this feature to detect if support for the 6th bit is there or not. The default value of both the mono and the stereo registers is 8000h (1000 0000 0000 0000), which corresponds to 0dB gain with mute on. MUTE MX4...MX0 FUNCTION 0 0 0000 0dB attenuation 0 0 0001 1.5dB attenuation 0 1 1111 46.5dB attenuation 1 x xxxx ∞dB attenuation Table 8 Volume Register Function The Headphone out has an additional 6dB boost, selectable by setting HPB in register 74h. PC BEEP REGISTER (INDEX 0Ah) This controls the level for the PC-beep input. Each step corresponds to approximately 3dB of attenuation. The MSB of the register is the mute bit. When this bit is set to 1 the level for that channel is set at - ∞dB. WM9705 defaults to the PC-beep path being muted, so an external speaker should be provided within the PC to alert the user to power on self-test problems. MUTE PV3...PV0 FUNCTION 0 0000 0dB attenuation 0 1111 45dB attenuation 1 xxxx ∞dB attenuation Table 9 PC-beep Register Function ANALOGUE MIXER INPUT GAIN REGISTERS (INDEX 0Ch - 18h AND 72h) This controls the gain/attenuation for each of the analogue inputs and mixer PGA. Each step corresponds to approximately 1.5dB. The MSB of the register is the mute bit. When this bit is set to 1 the level for that channel is set at - ∞dB. Note that the gain for the VID and AUX input channels is fixed at 0dB. Writes to the gain control bits for these channels are ignored, and the value of readback for these registers is always the default, with the exception of the mute bit 15 which may be written to and read from. The default value for the mono registers is 8008h, which corresponds to 0dB gain with mute on. The default value for stereo registers is 8808h, which corresponds to 0dB gain with mute on. MUTE GX4...GX0 FUNCTION 0 00000 +12dB gain 0 01000 0dB gain 0 11111 -34.5dB gain 1 xxxxx - ∞dB gain Table 10 Mixer Gain Control Register Function REGISTER 0Eh (MIC VOLUME REGISTER) This has an extra bit that is for a 20dB boost. When bit 6 is set to 1 the 20dB boost is on. The default value is 8008h, which corresponds to 0dB gain with mute on. RECORD SELECT CONTROL REGISTER (INDEX 1Ah) Used to select the record source independently for right and left (see Table 11). The default value is 0000h, which corresponds to Mic in. Setting Bit ADCNDAC in Register 5Ch selects a stereo mix WITHOUT DAC when (5 x 2 – 5 x 0) is 5. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
