SC667201MMG3 datasheet(57/120 Pages) FREESCALE

57 / 120 page

MPC5642A Microcontroller Data Sheet, Rev. 3.1

Freescale Semiconductor

Electrical characteristics

6 All functional non-supply I/O pins are clamped to V

SS and VDDE, or VDDEH.

7 Internal structures hold the voltage greater than –1.0 V if the injection current limit of 2 mA is met.

8 AC signal overshoot and undershoot of up to 2.0 V of the input voltages is permitted for an accumulative duration of

60 hours over the complete lifetime of the device (injection current not limited for this duration).

9 Internal structures hold the input voltage less than the maximum voltage on all pads powered by V

DDEH supplies, if

the maximum injection current specification is met (2 mA for all pins) and VDDEH is within the operating voltage

specifications.

10 Internal structures hold the input voltage less than the maximum voltage on all pads powered by V

DDE supplies, if

the maximum injection current specification is met (2 mA for all pins) and VDDE is within the operating voltage

specifications.

11 Total injection current for all pins (including both digital and analog) must not exceed 25 mA.

12 Total injection current for all analog input pins must not exceed 15 mA.

13 Lifetime operation at these specification limits is not guaranteed.

14 Solder profile per IPC/JEDEC J-STD-020D

15 Moisture sensitivity per JEDEC test method A112

SC667201MMG3 Datasheet(PDF) 57 Page - Freescale Semiconductor, Inc