TL16PC564BLVIPZ datasheet(13/35 Pages) TI1

13 / 35 page

TL16PC564BLVI

PCMCIA UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER

SLLS627− SEPTEMBER 2004

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

power consumption

The TL16PC564BLVI has low power consumption under the following conditions:

• 32-MHz signal on XIN

• Divide-by-n is set to give a 1.8432-MHz UARTCLK signal

• Nominal data

• V

CC = 5 V

The current (ICC) and power consumption are 18 mA (typical) and 90 mW (typical), respectively. These current

and power figures fluctuate with changes in the above conditions.

absolute maximum ratings over operating free-air temperature range†

Supply voltage range, VCC

−0.5 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (standard)

−0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (fail safe)

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage range, VO (standard)

−0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage range, VO (fail safe)

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1)

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 2)

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, TA

−40

°C to 85°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. Applies for external input and bidirectional buffers. VI > VCC does not apply to fail-safe pins.

2. Applies for external output and bidirectional buffers. VO > VCC does not apply to fail-safe pins.

recommended operating conditions

low voltage (3.3 V nominal)

MIN

NOM

MAX

UNIT

Supply voltage, VCC

TL16PC564BLVI

2.7

3.3

Input voltage, VI

VCC

High-level input voltage (CMOS), VIH (see Note 3)

0.7 VCC

Low-level input voltage (CMOS), VIL (see Note 3)

0.3 VCC

Output voltage, VO (see Note 4)

VCC

High-level output current, IOH

All outputs except RST, STSCHG, OUT1, OUT2 (see Note 5)

1.8

Low-level output current, IOL

All outputs except RST

3.2

Low-level output current, IOL

RST

6.4

Input transition time, tt

Operating free-air temperature range, TA

−40

°C

Junction temperature range, TJ (see Note 6)

−40

115

°C

NOTES:

3. Meets TTL levels, VIHmin = 2 V and VILmax = 0.8 V on nonhysteresis inputs

4. Applies for external output buffers

5. RST, STSCHG, OUT1, and OUT2 are open-drain outputs, so IOH does not apply.

6. These junction temperatures reflect simulation conditions. Absolute maximum junction temperature is 150

°C. The customer is

responsible for verifying junction temperature.

Not Recommended For New Designs

TL16PC564BLVIPZ Datasheet(PDF) 13 Page - Texas Instruments

TL16PC564BLVIPZ Datasheet(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Datasheet Download

Link URL