V62SLASH12615-01XE-R datasheet(72/97 Pages) TI1

72 / 97 page

DP83848-EP

SLLSEC6E – SEPTEMBER 2012 – REVISED JUNE 2019

www.ti.com

Submit Documentation Feedback

Product Folder Links: DP83848-EP

Detailed Description

5.6.2.10 10Base-T Status/Control Register (10BTSCR)

Table 5-27. 10Base-T Status/Control Register (10BTSCR), Address 0x1A

BIT

BIT NAME

DEFAULT

DESCRIPTION

10BT_SERIAL

Strap, RW

10Base-T Serial Mode (SNI):

1 = Enables 10Base-T Serial Mode

0 = Normal Operation

Places 10 Mbps transmit and receive functions in Serial Network

Interface (SNI) Mode of operation. Has no effect on 100 Mbps

operation.

14:12

RESERVED

0, RW

RESERVED: Must be zero

11:9

SQUELCH

100, RW

Squelch Configuration:

Used to set the Squelch ‘ON’ threshold for the receiver

Default Squelch ON is 330mV peak

LOOPBACK_10_D IS

0, RW

In half-duplex mode, default 10BASE-T operation loops Transmit data

to the Receive data in addition to transmitting the data on the physical

medium. This is for consistency with earlier 10BASE2 and 10BASE5

implementations which used a shared medium. Setting this bit

disables the loopback function.

This bit does not affect loopback due to setting BMCR[14].

LP_DIS

0, RW

Normal Link Pulse Disable:

1 = Transmission of NLPs is disabled

0 = Transmission of NLPs is enabled

FORCE_LINK_10

0, RW

Force 10Mb Good Link:

1 = Forced Good 10Mb Link

0 = Normal Link Status

RESERVED

0, RW

RESERVED: Must be zero

POLARITY

RO/LH

10Mb Polarity Status:

This bit is a duplication of bit 12 in the PHYSTS register. Both bits will

be cleared upon a read of 10BTSCR register, but not upon a read of

the PHYSTS register.

1 = Inverted Polarity detected

0 = Correct Polarity detected

RESERVED

0, RW

RESERVED: Must be zero

RESERVED

1, RW

RESERVED: Must be zero

HEARTBEAT_DIS

0, RW

Heartbeat Disable: This bit only has influence in half-duplex 10Mb

mode.

1 = Heartbeat function disabled

0 = Heartbeat function enabled

When the device is operating at 100Mb or configured for full duplex

operation, this bit will be ignored - the heartbeat function is disabled.

JABBER_DIS

0, RW

Jabber Disable:

Applicable only in 10BASE-T.

1 = Jabber function disabled

0 = Jabber function enabled

V62/12615-01XE-R Datasheet(PDF) 72 Page - Texas Instruments

V62/12615-01XE-R Datasheet(HTML) 72 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

Datasheet Download

Link URL