| Electronic Components Datasheet Search |
|
STEF12E Datasheet(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STEF12E Datasheet(HTML) 1 Page - STMicroelectronics |
|
1 / 19 page ![]() Features • Continuous current typ. 3.6 A • N-channel on-resistance typ. 45 mΩ • Enable/fault functions • Output clamp voltage typ. 15 V • Undervoltage lockout • Short-circuit limit • Overload current limit • Controlled output voltage ramp • Thermal latch typ. 165 °C • Uses tiny capacitors • Operating junction temp. -40 °C to 125 °C • Available in DFN10 (3x3 mm) package • UL2367 Recognized - File N. E468771 Applications • Hard disk drives • Solid state drives (SSD) • Hard disk and SSD arrays • Set-top boxes • DVD and Blu-ray disc drivers Description The STEF12E is an integrated electronic fuse optimized for monitoring output current and input voltage. Connected in series to a 12 V rail, it is capable of protecting the electronic circuitry on its output from overcurrent and overvoltage. The device has a controlled delay and turn-on time. When an overload condition occurs, the STEF12E limits the output current to a predefined safe value. If the anomalous overload condition persists it goes into an open state, disconnecting the load from the power supply. If a continuous short-circuit is present on the board, when power is re-applied the E-fuse initially limits the output current to a safe value and then again goes into an open state. The device is equipped with a thermal protection circuit. The intervention of the thermal protection is signalled to the board monitoring circuits through a signal on the Fault pin. Unlike the mechanical fuses, which must be physically replaced after a single event, the Efuse does not degrade in its performance after short-circuit/thermal protection interventions and it is reset either by recycling the supply voltage or using the Enable pin. The companion chip for the 5 V power rails is also available with part number STEF05. DFN10 (3x3 mm) Maturity status link STEF12E Device summary Order code STEF12EPUR Package DFN10 (3x3 mm) Packing Tape and reel Electronic fuse for 12 V line STEF12E Datasheet DS12800 - Rev 2 - June 2022 For further information contact your local STMicroelectronics sales office. www.st.com |
Similar Part No. - STEF12E |
|
Similar Description - STEF12E |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |