T89C5115-RATIM datasheet(69/105 Pages) ATMEL

Part #	T89C5115-RATIM

Description	Low Pin Count 8-bit MCU with A/D Converter and 16-Kbytes of Flash Memory

PDF	105 Pages

Scroll/Zoom	100%

Manufacturer	ATMEL [ATMEL Corporation]

Direct Link	http://www.atmel.com

Logo

69 / 105 page

T89C5115

4128A–8051–04/02

PCA Interrupt

Figure 31. PCA Interrupt System

PCA Capture Mode

To use one of the PCA modules in capture mode either one or both of the CCAPM bits

CAPN and CAPP for that module must be set. The external CEX input for the module

(on port 1) is sampled for a transition. When a valid transition occurs the PCA hardware

loads the value of the PCA counter registers (CH and CL) into the module’s capture reg-

isters (CCAPnL and CCAPnH). If the CCFn bit for the module in the CCON SFR and the

ECCFn bit in the CCAPMn SFR are set then an interrupt will be generated.

Figure 32. PCA Capture Mode

CCON

0xD8

CCF1

CCF0

Module 1

Module 0

PCA Timer/Counter

To Interrupt

IEN0.6

IEN0.7

ECF

CMOD.0

ECCFn

CCAPMn.0

CEXn

n=0, 1

PCA Counter

(8bits)

CCAPnH CCAPnL

CCFn

CCON Reg

PCA

Interrupt

Request

CCAPMn Register (n = 0, 1)

ECCFn

CAPNn000

0CAPPn

T89C5115-RATIM Datasheet(PDF) 69 Page - ATMEL Corporation