| Electronic Components Datasheet Search |
|
STM32U575VG Datasheet(PDF) 59 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U575VG Datasheet(HTML) 59 Page - STMicroelectronics |
|
59 / 329 page ![]() DS13737 Rev 6 59/329 STM32U575xx Functional overview 88 3.25.1 OCTOSPI TrustZone security When the TrustZone security is enabled, the whole OCTOSPI bank is secure after reset. Up to two non-secure area can be configured thought the TZSC MPCWM1 and MPCWM5 controllers with a granularity of 64 Kbytes. The OCTOSPI registers can be configured as secure through the TZSC controller. 3.26 OCTOSPI I/O manager (OCTOSPIM) The OCTOSPI I/O manager is a low-level interface enabling: • efficient OCTOSPI pin assignment with a full I/O matrix (before alternate function map) • multiplex of Single-, Dual-, Quad-, Octal-SPI interfaces over the same bus and hence support memories embedded in a multichip package The OCTOSPIM main features are: • Supports up to two Single-, Dual-, Quad-, Octal-SPI interfaces • Supports up to two ports for pin assignment • Fully programmable I/O matrix for pin assignment by function (data/control/clock) 3.27 Delay block (DLYB) The delay block (DLYB) is used to generate an output clock that is dephased from the input clock. The phase of the output clock must be programmed by the user application. The output clock is then used to clock the data received by another peripheral such as a SDMMC or Octo-SPI interface. The delay is voltage and temperature dependent, that may require the application to re-configure and recenter the output clock phase with the received data. The delay block main features are: • Input clock frequency ranging from 25 to 160 MHz • Up to 12 oversampling phases 3.28 Analog-to-digital converter (ADC1 and ADC4) The devices embed two successive approximation analog-to-digital converters. Table 15. ADC features ADC modes/features(1) ADC1 ADC4 Resolution 14 bits 12 bits Maximum sampling speed for 14-bit resolution 2.5 Msps 2.5 Msps Hardware offset calibration X X Hardware linearity calibration X - Single-ended inputs X X Differential inputs X - |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |