| Electronic Components Datasheet Search |
|
STM32U575VG Datasheet(PDF) 62 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U575VG Datasheet(HTML) 62 Page - STMicroelectronics |
|
62 / 329 page ![]() Functional overview STM32U575xx 62/329 DS13737 Rev 6 3.28.2 Analog-to-digital converter 4 (ADC4) The 12-bit ADC4 is a successive approximation analog-to-digital converter. It has up to 25 multiplexed channels allowing it to measure signals from 19 external and six internal sources. A/D conversion of the various channels can be performed in Single, Continuous, Scan or Discontinuous mode. The result of the ADC is stored in a left-aligned or right-aligned 16-bit data register. The analog watchdog feature allows the application to detect if the input voltage goes outside the user-defined higher or lower thresholds. An efficient low-power mode is implemented to allow very low consumption at low frequency. The ADC4 is autonomous in low-power modes down to Stop 2 mode. A built-in hardware oversampler allows analog performances to be improved while off-loading the related computational burden from the CPU. The ADC4 main features are: • High performance – 12-, 10-, 8- or 6-bit configurable resolution – A/D conversion time: 0.4 µs for 12-bit resolution (2.5 MHz), faster conversion times obtained by lowering resolution – Self-calibration – Programmable sampling time – Data alignment with built-in data coherency – DMA support • Low-power – HCLK frequency reduced for low-power operation while still keeping optimum ADC performance – Wait mode: ADC overrun prevented in applications with low frequency HCLK – Auto-off mode: ADC automatically powered off except during the active conversion phase, dramatically reducing the ADC power consumption – Autonomous mode: In low-power modes down to Stop 2 mode, the ADC4 is automatically switched on when a trigger occurs to start conversion, and it is automatically switched off after conversion. Data are transfered in SRAM with DMA. – ADC4 interrupts wake up the device from Stop 0, Stop 1 and Stop 2 modes. • Analog input channels – Up to 19 external analog inputs – One channel for the internal temperature sensor (VSENSE) – One channel for the internal reference voltage (VREFINT) – One channel for the internal digital core voltage (VCORE) – One channel for monitoring the external VBAT power supply pin – Connection to two DAC internal channels • Start-of-conversion can be initiated: – By software – By hardware triggers with configurable polarity (timer events or GPIO input events) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |