| Electronic Components Datasheet Search |
|
STM32U575VG Datasheet(PDF) 86 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U575VG Datasheet(HTML) 86 Page - STMicroelectronics |
|
86 / 329 page ![]() Functional overview STM32U575xx 86/329 DS13737 Rev 6 3.46 Controller area network (FDCAN) The controller area network (CAN) subsystem consists of one CAN module, a shared message RAM memory and a configuration block. The modules (FDCAN) are compliant with ISO 11898-1: 2015 (CAN protocol specification version 2.0 part A, B) and CAN FD protocol specification version 1.0. A 0.8-Kbyte message RAM implements filters, receives FIFOs, transmits event FIFOs and transmits FIFOs. The FDCAN main features are: • Conform with CAN protocol version 2.0 part A, B and ISO 11898-1: 2015, -4 • CAN FD with maximum 64 data bytes supported • CAN error logging • AUTOSAR and J1939 support • Improved acceptance filtering • 2 receive FIFOs of three payloads each (up to 64 bytes per payload) • Separate signaling on reception of high priority messages • Configurable transmit FIFO / queue of three payload (up to 64 bytes per payload) • Configurable transmit Event FIFO • Programmable loop-back test mode • Maskable module interrupts • Two clock domains: APB bus interface and CAN core kernel clock • Power-down support 3.47 USB on-the-go full-speed (OTG_FS) The devices embed a USB OTG full-speed device/host/OTG peripheral with integrated transceivers. The USB OTG_FS peripheral is compliant with the USB 2.0 specification and with the OTG 2.0 specification. It has software-configurable endpoint setting and supports suspend/resume. This interface requires a precise 48 MHz clock that can be generated from the internal main PLL (the clock source must use a HSE crystal oscillator) or by the internal 48 MHz oscillator (HSI48) in Automatic-trimming mode. The synchronization for this oscillator can be taken from the USB data stream itself (SOF signalization) that allows crystal less operation. The OTG_FS features are: • USB-IF certified to the Universal Serial Bus Specification Rev 2.0 • On-chip full-speed PHY • Full support (PHY) for the optional OTG (on-the-go) protocol detailed in the OTG Supplement Rev 2.0 specification – Integrated support for A-B device identification (ID line) – Integrated support for host negotiation protocol (HNP) and session request protocol (SRP) – Allows host to turn VBUS off to conserve battery power in OTG applications – Supports OTG monitoring of VBUS levels with internal comparators – Supports dynamic host-peripheral switch of role |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |