| Electronic Components Datasheet Search |
|
STM32U575VG Datasheet(PDF) 63 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U575VG Datasheet(HTML) 63 Page - STMicroelectronics |
|
63 / 329 page ![]() DS13737 Rev 6 63/329 STM32U575xx Functional overview 88 • Conversion modes – Conversion of a single channel or scan of a sequence of channels – Selected inputs converted once per trigger in Single mode – Selected inputs converted continuously in Continuous mode – Discontinuous mode • Interrupt generation at the end of sampling, end of conversion, end of sequence conversion, and in case of analog watchdog or overrun events, with wakeup from Stop capability • Analog watchdog • Oversampler – 16-bit data register – Oversampling ratio adjustable from 2 to 256 – Programmable data shift up to 8 bits • ADC supply requirements: 1.62 to 3.6 V • ADC input range: VSSA < VIN < VREF+ Note: The ADC4 analog block clock frequency must be between 140 kHz and 55 MHz. 3.28.3 Temperature sensor The temperature sensor generates a voltage VSENSE that varies linearly with temperature. The temperature sensor is internally connected to ADC1 and ADC4 input channel that is used to convert the sensor output voltage into a digital value. The sensor provides good linearity but it must be calibrated to obtain a good accuracy of the temperature measurement. As the offset of the temperature sensor varies from chip to chip due to process variation, the uncalibrated internal temperature sensor is suitable for applications that detect temperature changes only. To improve the accuracy of the temperature sensor measurement, each device is individually factory-calibrated by ST. The temperature sensor factory calibration data are stored by STMicroelectronics in the system memory area, accessible in read-only mode. Table 16. Temperature sensor calibration values Calibration value name Description Memory address TS_CAL1 Temperature sensor 14-bit raw data acquired by ADC1 at 30 °C (± 5 °C), VDDA = VREF+ = 3.0 V (± 10 mV) 0x0BFA 0710 - 0x0BFA 0711 TS_CAL2 Temperature sensor 14-bit raw data acquired by ADC1 at 130 °C (± 5 °C), VDDA = VREF+ = 3.0 V (± 10 mV) 0x0BFA 0742 - 0x0BFA 0743 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |