| Electronic Components Datasheet Search |
|
STM32U575VG Datasheet(PDF) 222 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U575VG Datasheet(HTML) 222 Page - STMicroelectronics |
|
222 / 329 page ![]() Electrical characteristics STM32U575xx 222/329 DS13737 Rev 6 Output driving current The GPIOs (except PC13, PC14, PC15) can sink or source up to ±8 mA, and sink or source up to ± 20 mA (with a relaxed VOL/VOH). PC13, PC14, PC15 are limited to ±3 mA shared between the three I/Os. In the user application, the number of I/O pins tat can drive current must be limited to respect the absolute maximum rating specified in Section 5.2: Absolute maximum ratings: • The sum of the currents sourced by all the I/Os on VDDIOx, plus the maximum consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating ΣIVDD (see Table 30: Current characteristics). • The sum of the currents sunk by all the I/Os on VSS, plus the maximum consumption of the MCU sunk on VSS, cannot exceed the absolute maximum rating ΣIVSS (see Table 30: Current characteristics). Output voltage levels Unless otherwise specified, the parameters given in the table below are derived from tests performed under the ambient temperature and supply voltage conditions summarized in Table 32. All I/Os are CMOS- and TTL-compliant (FT OR TT unless otherwise specified). Table 93. Output voltage characteristics(1)(2)(3) Symbol Parameter Conditions Min Max Unit VOL Output low-level voltage CMOS port(4), |IIO| = 8 mA, 2.7 V ≤ VDDIOx ≤ 3.6 V -0.4 V VOH Output high-level voltage VDDIOx - 0.4 - VOL(5) Output low-level voltage TTL port(4),|IIO| = 8 mA, 2.7 V ≤ VDDIOx ≤ 3.6 V -0.4 VOH(5) Output high-level voltage 2.4 - VOL(5) Output low-level voltage All I/Os, |IIO| = 20 mA, 2.7 V ≤ VDDIOx ≤ 3.6 V -1.3 VOH(5) Output high-level voltage VDDIOx - 1.3 - VOL(5) Output low-level voltage |IIO| = 4 mA, 1.58 V ≤ VDDIOx ≤ 3.6 V -0.4 VOH(5) Output high-level voltage VDDIOx - 0.4 - VOL(5) Output low-level voltage |IIO| = 1 mA, 1.08 V ≤ VDDIOx <3.6 V -0.4 VOH(5) Output high-level voltage VDDIOx - 0.4 - VOLFM+(5) Output low-level voltage for a FT_f I/O pin in FM+ mode |IIO| = 20 mA, 2.7 V ≤ VDDIOx ≤ 3.6 V -0.4 |IIO| = 10 mA, 1.58 V ≤ VDDIOx ≤ 3.6 V -0.4 |IIO| = 2 mA, 1.08 V ≤ VDDIOx < 3.6 V -0.4 1. The I/O structure options listed in this table can be a concatenation of options including the option explicitly listed. For instance TT_a refers to any TT I/O with _a option. TT_xx refers to any TT I/O and FT_xx refers to any FT I/O. 2. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 30: Current characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always respect the absolute maximum ratings ΣIIO. 3. FT_t I/O characteristics are degraded in VBAT mode (refer to Table 94). 4. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. 5. Specified by design. Not tested in production. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |