ATtiny88 datasheet(79/266 Pages) ATMEL

79 / 266 page

8008C–AVR–03/09

ATtiny48/88

An interrupt can be generated each time the counter value reaches the TOP value by using the

OCF0A Flag. If the interrupt is enabled, the interrupt handler routine can be used for updating

the TOP value. However, changing TOP to a value close to BOTTOM when the counter is run-

ning with none or a low prescaler value must be done with care since the CTC mode does not

have the double buffering feature. If the new value written to OCR0A is lower than the current

value of TCNT0, the counter will miss the compare match. The counter will then have to count to

its maximum value (0xFF) and wrap around starting at 0x00 before the compare match can

occur.

As for the Normal mode of operation, the TOV0 Flag is set in the same timer clock cycle that the

counter counts from MAX to 0x00.

11.7

Timer/Counter Timing Diagrams

The Timer/Counter is a synchronous design and the timer clock (clk

T0) is therefore shown as a

clock enable signal in the following figures. The figures include information on when interrupt

flags are set. Figure 11-5 contains timing data for basic Timer/Counter operation. The figure

shows the count sequence close to the MAX value in all modes.

Figure 11-5. Timer/Counter Timing Diagram, no Prescaling

Figure 11-6 shows the same timing data, but with the prescaler enabled.

Figure 11-6. Timer/Counter Timing Diagram, with Prescaler (f

clk_I/O/8)

Figure 11-7 shows the setting of OCF0B in all modes and OCF0A in all modes except CTC

mode.

clk

(clk

I/O/1)

TOVn

clk

I/O

TCNTn

MAX - 1

MAX

BOTTOM

BOTTOM + 1

TOVn

TCNTn

MAX - 1

MAX

BOTTOM

BOTTOM + 1

clk

I/O

clk

(clk

I/O/8)

ATtiny88 Datasheet(PDF) 79 Page - ATMEL Corporation

ATtiny88 Datasheet(HTML) 79 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL