WM8980CGEFLSLASHV datasheet(6/123 Pages) WOLFSON

6 / 123 page

WM8980

Pre-Production

PP, Rev 3.8, May 2012

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously

operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given

under Electrical Characteristics at the test conditions specified.

ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible

to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage

of this device.

Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage

conditions prior to surface mount assembly. These levels are:

MSL1 = unlimited floor life at <30

C / 85% Relative Humidity. Not normally stored in moisture barrier bag.

MSL2 = out of bag storage for 1 year at <30

C / 60% Relative Humidity. Supplied in moisture barrier bag.

MSL3 = out of bag storage for 168 hours at <30

C / 60% Relative Humidity. Supplied in moisture barrier bag.

The Moisture Sensitivity Level for each package type is specified in Ordering Information.

CONDITION

MIN

MAX

DBVDD, DCVDD, AVDD, VBVDD supply voltages

-0.3V

+4.5V

SPKVDD supply voltage

-0.3V

+7V

Voltage range digital inputs

DGND -0.3V

DVDD +0.3V

Voltage range analogue inputs

AGND -0.3V

AVDD +0.3V

Operating temperature range, TA

-25

C

+85

C

Storage temperature after soldering

-65

C

+150

C

Notes

Analogue and digital grounds must always be within 0.3V of each other.

All digital and analogue supplies are completely independent from each other.

RECOMMENDED OPERATING CONDITIONS

PARAMETER

SYMBOL

TEST

CONDITIONS

MIN

TYP

MAX

UNIT

Digital supply range (Core)

DCVDD

1.71

3.6

Digital supply range (Buffer)

DBVDD

1.71

3.6

Analogue core supply range

AVDD

2.5

3.6

Video buffer supply range

VBVDD

2.5

3.6

Analogue output supply range

SPKVDD

2.5

5.5

Ground

DGND,AGND,

SPKGND,VBGND

Notes

When using the PLL, DCVDD must not be less than 1.9V.

DBVDD must be greater than or equal to DCVDD.

Analogue supplies have to be

 to digital supplies.

In non-boosted mode, SPKVDD should = AVDD, if boosted SPKVDD should be

 1.5x AVDD.

WM8980CGEFL/V Datasheet(PDF) 6 Page - Wolfson Microelectronics plc

WM8980CGEFL/V Datasheet(HTML) 6 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL