| Electronic Components Datasheet Search |
|
WM8980CGEFL/V Datasheet(PDF) 77 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8980CGEFL/V Datasheet(HTML) 77 Page - Wolfson Microelectronics plc |
|
77 / 123 page ![]() Pre-Production WM8980 w PP, Rev 3.8, May 2012 77 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4 Audio Interface Control 0 MONO 0 Selects between stereo and mono device operation: 0=Stereo device operation 1=Mono device operation. Data appears in ‘left’ phase of LRC 1 ADCLRSWAP 0 Controls whether ADC data appears in ‘right’ or ‘left’ phases of LRC clock: 0=ADC data appear in ‘left’ phase of LRC 1=ADC data appears in ‘right’ phase of LRC 2 DACLRSWAP 0 Controls whether DAC data appears in ‘right’ or ‘left’ phases of LRC clock: 0=DAC data appear in ‘left’ phase of LRC 1=DAC data appears in ‘right’ phase of LRC 4:3 FMT 10 Audio interface Data Format Select: 00=Right Justified 01=Left Justified 10=I 2S format 11= DSP/PCM mode 6:5 WL 10 Word length 00=16 bits 01=20 bits 10=24 bits 11=32 bits (see note) 7 LRP right, left and i2s modes – LRCLK polarity 1 = invert LRCLK polarity 0 = normal LRCLK polarity DSP Mode – mode A/B select 1 = MSB is available o n 1st BCLK rising edge after LRC rising edge (mode B) 0 = MSB is available o n 2nd BCLK rising edge after LRC rising edge (mode A) 8 BCP BCLK polarity 0=normal 1=inverted Table 55 Audio Interface Control ADCLRSWAP bit controls whether the ADC data appears in the right or left phase of the LRC clock as defined for each audio format. Similarly, DACLRSWAP can be used to swap the left DAC data from the left phase to the right phase of the LRC clock and the right DAC data from the right phase to the left phase of the LRC clock. Note: Right Justified Mode will only operate with a maximum of 24 bits. If 32-bit mode is selected, the device will operate in 24-bit mode. AUDIO INTERFACE CONTROL The register bits controlling audio format, word length and master / slave mode are summarised below. The audio interfaces can be controlled individually. Register bit MS selects audio interface operation in master or slave mode. In Master mode BCLK, and LRC are outputs. The frequency of BCLK in master mode are controlled with BCLKDIV. These are divided down versions of master clock. This may result in short BCLK pulses at the end of a LRC if there is a non-integer ratio of BCLKs to LRC clocks. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |