| Electronic Components Datasheet Search |
|
WM8980CGEFL/V Datasheet(PDF) 10 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8980CGEFL/V Datasheet(HTML) 10 Page - Wolfson Microelectronics plc |
|
10 / 123 page ![]() WM8980 Pre-Production w PP, Rev 3.8, May 2012 10 Test Conditions DCVDD=1.8V, AVDD=DBVDD=SPKVDD=VBVDD = 3.3V, TA = +25 oC, 1kHz signal, fs = 48kHz, 24-bit audio data unless otherwise stated. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Digital Input / Output Input HIGH Level VIH 0.7 DBVDD V Input LOW Level VIL 0.3 DBVDD V Output HIGH Level VOH IOL=1mA 0.9 DBVDD V Output LOW Level VOL IOH-1mA 0.1xDBVDD V Input capacitance 10 pF Input leakage 50 pA TERMINOLOGY 1. Input level to RIP and LIP is limited to a maximum of -3dB or THD+N performance will be reduced. 2. Note when BEEP path is not enabled then AUXL and AUXR have the same input impedances. 3. Hold Time is the length of time between a signal detected being too quiet and beginning to ramp up the gain. It does not apply to ramping down the gain when the signal is too loud, which happens without a delay. 4. Ramp-up and Ramp-Down times are defined as the time it takes for the PGA to sweep across 90% of its gain range. 5. All hold, ramp-up and ramp-down times scale proportionally with MCLK 6. Signal-to-noise ratio (dB) – SNR is a measure of the difference in level between the full scale output and the output with no signal applied. (No Auto-zero or Automute function is employed in achieving these results). 7. THD+N (dB) – THD+N is a ratio, of the rms values, of (Noise + Distortion)/Signal. 8. Channel Separation (dB) – Also known as Cross-Talk. This is a measure of the amount one channel is isolated from the other. Measured by applying a full scale signal to one channel input and measuring the level of signal apparent at the other channel output. 9. The maximum output voltage can be limited by the speaker power supply. If OUT3BOOST, OUT4BOOST or SPKBOOST is set then SPKVDD should be 1.5xAVDD to prevent clipping taking place in the output stage (when PGA gains are set to 0dB). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |