| Electronic Components Datasheet Search |
|
V62/12615-01XE-R Datasheet(PDF) 69 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
V62/12615-01XE-R Datasheet(HTML) 69 Page - Texas Instruments |
|
69 / 98 page ![]() 69 DP83848-EP www.ti.com SLLSEC6E – SEPTEMBER 2012 – REVISED JUNE 2019 Submit Documentation Feedback Product Folder Links: DP83848-EP Detailed Description Copyright © 2012–2019, Texas Instruments Incorporated Table 5-23. 100 Mbps PCS Configuration and Status Register (PCSR), Address 0x16 (continued) BIT BIT NAME DEFAULT DESCRIPTION 8 SD_OPTION 1, RW Signal Detect Option: 1 = Enhanced signal detect algorithm 0 = Reduced signal detect algorithm 7 DESC_TIME 0, RW Descrambler Timeout: Increase the descrambler timeout. When set this should allow the device to receive larger packets (>9k bytes) without loss of synchronization. 1 = 2 ms 0 = 722 µs (per ANSI X3.263: 1995 (TP-PMD) 7.2.3.3e) 6 RESERVED 0 RESERVED: Must be zero 5 FORCE_100_OK 0, RW Force 100Mbps Good Link: 1 = Forces 100Mbps Good Link 0 = Normal 100Mbps operation 4 RESERVED 0 RESERVED: Must be zero 3 RESERVED 0 RESERVED: Must be zero 2 NRZI_BYPASS 0, RW NRZI Bypass Enable: 1 = NRZI Bypass Enabled 0 = NRZI Bypass Disabled 1 RESERVED 0 RESERVED: Must be zero 0 RESERVED 0 RESERVED: Must be zero 5.6.2.7 RMII and Bypass Register (RBR) This register configures the RMII Mode of operation. When RMII mode is disabled, the RMII functionality is bypassed. Table 5-24. RMII and Bypass Register (RBR), Addresses 0x17 BIT BIT NAME DEFAULT DESCRIPTION 15:6 RESERVED 0, RO Reserved: Writes ignored, Read as 0 5 RMII_MODE Strap, RW Reduced MII Mode: 0 = Standard MII Mode 1 = Reduced MII Mode 4 RMII_REV1_0 0, RW Reduce MII Revision 1.0: 0 = (RMII revision 1.2) CRS_DV will toggle at the end of a packet to indicate deassertion of CRS. 1 = (RMII revision 1.0) CRS_DV will remain asserted until final data is transferred. CRS_DV will not toggle at the end of a packet. 3 RX_OVF_STS 0, RO RX FIFO Over Flow Status: 0 = Normal 1 = Overflow detected 2 RX_UNF_STS 0, RO RX FIFO Under Flow Status: 0 = Normal 1 = Underflow detected |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |