| Electronic Components Datasheet Search |
|
PPC440GX-3RF800C Datasheet(PDF) 13 Page - Applied Micro Circuits Corporation |
|
|
|||||||||||||||||||||||||||||
PPC440GX-3RF800C Datasheet(HTML) 13 Page - Applied Micro Circuits Corporation |
|
13 / 93 page ![]() 440GX – Power PC 440GX Embedded Processor AMCC 13 Revision 1.15 – August 30, 2007 Data Sheet • External master interface - Write posting from external master - Read prefetching on PLB for external master reads - Bursting capable from external master - Allows external master access to all non-EBC PLB slaves - External master can control EBC slaves for own access and control Ethernet Controller Interface Ethernet support provided by the PPC440GX interfaces to the physical layer, but the PHY is not included on the chip. Features include: • One to four 10/100 interfaces running in full- and half-duplex modes - One full Media Independent Interface (MII) with 4-bit parallel data transfer - Two Reduced Media Independent Interfaces (RMII) with 2-bit parallel data transfer - Four Serial Media Independent Interfaces (SMII) • One or two GMII interfaces running in full- and half-duplex modes at 10Mb/s or 100Mb/s or 1000Mb/s - One full Gigabit Media Independent Interface (GMII) with 8-bit parallel data transfer - Two Reduced Gigabit Media Independent Interfaces (RGMII) with 4-bit parallel data transfer • One or two TBI interfaces running in full- and half-duplex modes at 10Mb/s or 100Mb/s or 1000Mb/s - One full Ten Bit Interface (TBI) with 10-bit parallel data transfer - Two Reduced Ten Bit Interfaces (RTBI) with 4-bit parallel data transfer • Jumbo frame support (9016 byte) - Support for Ethernet II formatted frames (RFC894) - Support for IEEE formatted frames (RFC1042) - Handles VLAN-tagged frames TCP/IP Acceleration Hardware (TAH) Features include: • Offloads Gigabit Ethernet protocol processing from the CPU • Checksum verification for TCP/UDP/IP headers in the receive path • Checksum generation for TCP/UDP/IP headers in the transmit path • TCP segmentation support in the transmit path DMA Controller Features include: • Supports the following transfers: - Memory-to-memory transfers - Buffered peripheral to memory transfers - Buffered memory to peripheral transfers • Four channels • Scatter/Gather capability for programming multiple DMA operations • 8-, 16-, 32-bit peripheral support (OPB and external) • 64-bit addressing • 128 byte FIFO buffer • Address increment or decrement • Supports internal and external peripherals • Support for memory mapped peripherals |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |