| Electronic Components Datasheet Search |
|
PPC440GX-3RF800C Datasheet(PDF) 57 Page - Applied Micro Circuits Corporation |
|
|
|||||||||||||||||||||||||||||
PPC440GX-3RF800C Datasheet(HTML) 57 Page - Applied Micro Circuits Corporation |
|
57 / 93 page ![]() 440GX – Power PC 440GX Embedded Processor AMCC 57 Revision 1.15 – August 30, 2007 Data Sheet Trace Interface TrcBS0:2 Trace branch execution status. I/O 3.3V LVTTL TrcClk Trace data capture clock, runs at 1/4 the frequency of the processor. O 3.3V LVTTL TrcES0:4 Trace Execution Status is presented every fourth processor clock cycle. I/O 3.3V LVTTL TrcTS0:5 (multiplexed with GPIO signals) Additional information on trace execution and branch status. Note:The trace signals, TrcTS0:6, are duplicated on two sets of chip balls and are multiplexed with other signals in both cases. This allows users to choose which set of multiplexed signals they wish to use along with the TrcTS0:6 signals. The trace signals in this set are primary signals. I/O 3.3V tolerant 2.5V CMOS TrcTS1:5 (multiplexed with EBC signals) Additional information on trace execution and branch status. Note:The trace signals in this set are secondary signals. I/O 3.3V LVTTL TrcTS6 (multiplexed with EBC and Ethernet signals) Additional information on trace execution and branch status. Note:This trace signal is the primary signal. I/O 3.3V LVTTL Power Pins AGND PLL (analog) voltage ground. na na GND Ground. na na AxVDD 1.5V—Filtered voltages input for PLLs (analog circuits) Note: A separate filter for each of the three voltages is recommended. na na OVDD 3.3V supply—I/O (except DDR SDRAM, Ethernet) na na SVDD 2.5V supply—DDR SDRAM, Ethernet na na VDD 1.5V supply—Logic voltage. na na Signal Functional Description (Sheet 8 of 8) Notes: 1. Receiver input has hysteresis 2. Must pull up (recommended value is 3k Ω to 3.3V) 3. Must pull down (recommended value is 1k Ω) 4. If not used, must pull up (recommended value is 3k Ω to 3.3V) 5. If not used, must pull down (recommended value is 1k Ω) 6. Strapping input during reset; pull-up or pull-down required Signal Name Description I/O Type Notes |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |